Elite Marine Maintenance Service

This service focus on preventing the most common failures without overwhelming the owner with overly technical procedures.

Voltage and Charge Status Verification: Cold and load testing to detect degraded cells before heading out to sea.
Terminal Inspection and Cleaning: Elimination of sulfation and corrosion; application of protective dielectric sealant.
Level Check and Refill (if applicable): Adjustment of electrolyte levels with demineralized water in flooded lead-acid batteries.
Securing and Ventilation Inspection: Confirmation that battery banks are rigidly anchored and located in properly ventilated areas.
Charging System / Alternator Test: Verification that the alternator and shore chargers distribute current evenly.

Connection and Sulfation Inspection: Visual check and tightening of connections on main panels, busbars, and selector switches.
Bilge Pump and Float Switch Testing: Manual and automatic operation testing to ensure proper drainage in emergencies.
Navigation and Courtesy Light Inspection: Watertightness check, contact cleaning, and preventive bulb replacement.
Fuse and Breaker Verification: Quick thermal inspection to identify overheating points on the panel.
Galvanic System and Anode Testing: Basic insulation check and visual inspection of galvanic corrosion protection.

Screen and Control Cleaning & Protection: Hydrophobic treatment on displays (GPS, Chartplotters, Sonars) and connector cleaning.
Connector and Wiring Inspection (NMEA 2000 / Ethernet): Pin cleaning with electronic contact cleaner and application of dielectric grease on couplings.
Essential Equipment Operational Testing:
- VHF / Radio: Transmission/reception testing and antenna check.
- GPS / Fishfinder: Satellite signal verification and transducer operation test.
- Electronic Compass / Autopilot: Quick response verification and basic calibration.
Data Backup: Backup of waypoints and routes to memory cards or cloud prior to any updates.

Join our newsletter